Overview of the XH connector set Crimping range: 0.08-0.5mm² AWG28-20 In this review, I will tell you about the crimper for such connectors. First, tool specification: If you knock out the pins and unscrew the screws, the matrix can be replaced.

Crimper for small connectors XH2.54, Dupont and similar.

The crimper has a ratchet mechanism that allows you to pre-clamp the contact so that it does not fall out, and then calmly insert the wire into it. Its thickness is 4 mm, respectively, for contacts, the length of the crimped petals should be around this size. I’ll show you how to crimp and how he crimps. Next comes this interesting regulator: but I didn’t have a crimper for them. I once did a review of the XH2.54 connectors: Each half of the matrix is ​​fastened with a screw and two pins.
Let’s take a closer look at the components of the device. Therefore, for such connectors, even with small crimp volumes, a crimper would be very useful. And here is the tool itself: It is possible to crimp with an improvised tool, but this is an extremely dreary task due to their smallness. Compatible with: Dupont, PH2.0, KF2510, AMG28-20, Servo, XH2.54 / 3.96, PX, KK254, JST , Molex, D-SUB https://jiji.ng/port-harcourt/computers-and-laptops/asus.